Concept 2000 Single-Sided Modular Workstations

concept-2000-sindle-workstation

The Concept 2000 Series (C2) Bench is our flag ship model. This series is modular and yet versatile and can be customized with our extensive line of standard accessories. Design the workstation to best fit your needs for ESD technical assembly, simply by adding an ESD protected work surface and other ergonomic productivity accessories to best make your through-put more efficient. Or add other accessories such as gas and/or air turrets, phenolic resin work surface, shelving with protected book end panels, and make the workstation into modular laboratory furniture. Expansion to the line of workbenches can be achieved by ordering additional adder benches that will attach to the original Starter Bench to make it very economical for future growth.

Our Concept 2000 (C2) Starter Workstations come standard with (2) uprights (1) rear panel (1) Work surface with 180 degree rolled front edge (2) top support brackets. Adders come with only one upright, (2) top support brackets (1) work surface and (1) rear panel

Customization:

   Adder Workstations can be utilized to increase throughput with in-line tasking

   All benches are infinitely adjustable

   Benches can be integrated with Dedicated Electrical 1, 2 or 4 Circuits

   Multiple accessories available 

   Utility integrations

 

Economy in the workstation is appreciated when all utilities are interconnected and joined together from upright to upright, and bench to bench, thus resulting in a cost effective work environment.

All of WSI’s workstations components are ergonomically designed to ensure maximum worker safety, improved efficiency and greater productivity.

Dimensions

Standard Lengths: 48, 60, 72“, 96”
Standard Depths: 30, 36
Upright Heights: 75
Worksurface Height: Adjustable

Maximum Load
Single Sided-UL Listed: 750 lbs.

WSI-Customer-Service

We offer 3 main shipping options:

  1. Prepaid Shipping – WSI will prepay the shipping and add it to the invoice.
  2. Freight Collect – The customer pays the shipping company when the product arrives. A $45 charge, per pallet, for packaging will be added.
  3. Will Call – Will call goods can be sent knock down on a pallet or fully assembled.  Fully assembled products will require blankets and straps for wrapping to prevent damage

When WSI ships a fully assembled product, we provide all the blankets and straps.

Warranty Information

All WSI products come with a limited life time warranty . All structural steel components are warrantied for life against structural failure and three years for workmanship. Laminate work surface is warrantied for three years against delaminating and workmanship.

All painted finishes are warrantied for three years against paint defects or flaking. Lights and any other electrical accessories are warrantied for one year. Chairs: All non-moving structural components, (seat and back rest pans, back bar, and the base) come with a life time warranty. Seat and back rest foam, ESD fabric, standard fabric three years, all other moving components, seven years. Warranty date starts at the time the product ships out of our facility.

Replacement or repair is the sole discretion of WSI. The warranty Is based upon an eight hour day, five day work week.

Complete the form below for a free no obligation Quote


We will respond to your request very soon



Paint-color-options

Concept 2000 Assembly Manual

Drawers, Shelving & Accessories

Shelving

Lam-shelf-smAvailable depth sizes are 12″, 15″ & 18″.  Comes with two mounting brackets and a load beam. The load beam is only for the 60", 72" & 96" shelves.

  • Shelf material can be the same material used on the work surface, however, you need to specify when placing the order
  • Load bearing capacity 250 lbs evenly distributed
  • Heavier load capacity shelves are available
  • C2 shelves are infinitely adjustable
  • Shelves come in ESD & Standard laminate
  • Clean Room underseal on all laminate shelving is available

Steel-shelving-smAvailable depth sizes are 12″, 15″, & 18″.  Comes with front lip and two brackets.

  • All C2 shelves are infinitely adjustable,
  • Both style shelves can be tilted forward 15%,
  • All shelves come with load bearing shelf support,  300 lb load rated, evenly distributed
  • Extra heavy duty shelves are available

Wire-Shelf-sm12″ deep

  • Shelves are made of heavy gauge wire
  • Finished with a silver zinc epoxy powder coat
  • All wire shelves come with a 1″ front wire lip
  • 50 lb load rating evenly distributed
  • C2 shelves can tilt 15 degrees forward
  • split-shef-smThe split shelf design provides additional shelving and/or other hang-on accessories where needed.
  • Mounts to the inside uprights of C2 benches
  • Overhead Hutches, Electrical Channel, Shelves and other accessories can all mount to the frame
  • All WSI accessories can mount to a split shelf unit. Single sided split shelf frames mount on one side only. Double sided frames can have accessories mounted on both sides.

Cabinets

C2-FD-smSteel Flipper Door Hutch unit is constructed of heavy gauge steel

  • Door retracts and slides inside the cabinet.
  • All doors come with two inserted plastic handle for easy lift
  • All doors come with one lock
  • Available sizes are, 36″, 48″, 60″ & 72″
  • Cabinets come with two mounting brackets
  •  (2) 48″ hutches are used for 96″ bench

Electrical Systems

EL5 Electrical Option
All WSI electrical options have been certified by UL and are inspected on a monthly basis for installation practices and component consistency

  • Work surface mounted fits between uprights
  • Size 24", 36" & 48" lengths
  • 8', 10' or 15' power cords available
  • 8 outlets 15 & 20 amp
  • On off switch.

4C-UPG Electrical optionOur DEC-1 & DEC-2 Panels are equipped with Standard 20A or 15A outlets

Optional upgrades are available:

  • Gray outlets: Unlimited Power Source (UPS) 20A or 15A
  • Orange outlets: Emergency Back-up Power 20A or 15A
  • Data ports can be upgraded at time of order
  • GFI 30A poer configuration can be added to the DEC-1 Upgraded box

C@-Dec1 Electrical Option

  • Comes with 6 15A outlets in a single panel mounted box
  • DEC-2 provides two DEC-1 outlet panels mounted in each upright. Total of 12 outlets. Both DEC's can mount on one side of an upright or on each upright.They can mount above or below the work surface
  • You can upgrade to 20A outlets and power cord or to a multiple circuit system. 2 or 4 circuits (each circuit is labeled) are recommended when installing a run of benches

Utility Options

Utility Duct

  • Utility duct way (UDW) with data, air or gas shielded partitions
  • The utility chase mounts above the work surface and in between the uprights and can be interconnected from upright to upright, and bench to bench
  • UDW can also be used above doorways to continue flow of cables & wires with no interruptions
  • UL Listed when ordered with the C2 bench
  • Comes with the cover

Utility Duct MountUtility duct way mounts under the work surface to manage cables from upright to upright.

  • Power PolesOur C2 Power Pole attaches to any new or existing C2 upright.
  • Wires drops from the ceiling.
  • Comes standard with a conduit landing bracket for utilities, (Power, Data, Air or Gas) to tie into and cover shroud
  • Shroud is used to cover the gap between the top of the power pole & ceiling
  • Power pole comes within 3” short of the ceiling, specify height of ceiling when ordering.

Air HoseFor interconnecting air from bench to bench.

  • Mounts in front beam
  • Hostler mount ADSH-C2 comes with one female coupler, interconnecting hose, and pigtail hose for incoming source
  • Coupler can be purchased separately
  • Data OptionIntegrated into the DEC-1 box upright or power pole with data shielding
  • Specify Cat5 or Cat6 and length of patch if you want WSI to provide you with the patch cords or just the port opening and shielding in the upright DEC- Box.
  • Gas Turrets are available in single and double configuerations

Lighting

Overhead Light

Overhead lighting fixture with light housing and prismatic lens

  • Available in 24", 36", 48" widths
  • Wattage per LED light - 24" = 15W, 36" = 25W, 48" = 30W
  • Prismatic lens
  • According to new laws, fluorescent ballast type lights are no longer available
  • LED power efficiency is 85% and 30K - 50K hour life span
  • All sizes of light fixtures come in double tube, single tube or as an under counter light fixture
  • Bulbs sold separately. 24", 36" or 48" bulbs.

Under Shelf Light

  • Under counter light are available in 36″ and 48″ sizes. Only LED lights are available.

Swing Arm Options

Basic Swing Arm

  • Basic single swivel arm that can mount to a C2 upright or other modular bench uprights
  • Single 10″ arm comes with a mounting bracket and hinged panel bracket
  • Basic arms just swing in and out
  • If used for other uprights that are different than WSI's, further information will be required

Flat Screen Monitor Arm

  • Holds up to a 19" monitor
  • Swing Arm is 10" in lenght
  • Shown here with the extension arm attached

Flat Screen Monitor Arm Extension

  • Extension arm attached to the Flat Screen Monitor Arm
  • Adds an additional 8" in lenght
  • Two arms allow for 180 degrees of rotation
  • Loosen bolts to move up and down
  • Holds 19" monitor
  • Purchase a double arm and receive 10" arm, 8" arm, 3 knuckles, 1 mounting bracket and 1 hinged panel bracket for connecting arms together and mounting

Platform Swing Arm

  • Used to hold, laptop, tools, paper etc.
  • Steel surface
  • 12" x 12" with lower lip at bottom

Platform Swing Arm

  • Uses the Flat Screen Monitor Arm and then WSI adds a keyboard option and arm to mount the monitor.

Drawers

Our drawers are ergonomically designed and constructed to offer you a wide array of options.

All of our drawers come with:

 18" Full Extension

 100-lb Rated Heavy Duty Roller Bearing Slide

 Drawer Dimensions - 15" wide x 18" deep

 Please specify when ordering if locks are needed and if they need to be keyed the same or differently

Drawer Configurations

We also offer several different handle options:

 Plastic cup handle

 Aluminum handle cup pull handle

 Full finger steel pull that runs the length of the drawer

 Lab grade aluminum handle pull

 Chrome wire pull

Single 3" Drawer

(1)-3-inch

Four 3" Drawers & Two 6" Drawers

(4)-3-inch---(2)-6-inch

Two 3" Drawers & Three 6" Drawers

Eight 3" Drawers

8-3inch-drawers

Four 3" Drawers & One 12" Drawer

(4)-3-inch---(1)-12-inch

Four 3" Drawers & One 12" Locker - Right

(4)-3-inch---(1)-12-inch-locker-right

Four 3" Drawers & One 12" Locker - Left

(4)-3-inch---(1)-12-inch-locker-left

Two 3" Drawers & One 18" Locker - Right

(2)-3-inch---(1)-18-locker-right

Two 3" Drawers & One 18" Locker - Left

(2)-3-inch---(1)-18-locker-left

Single 6" Drawer

(1)-6-inch

Two 6" Drawers

(2)-6-inch

Four 6" Drawers

(4)-6-inch

One 6" Drawer & One 12" Drawer

1-6-1-12-horz

Two 6" Drawers & One 12" Drawer

(2)-6-inch---(1)-12-inch

Two 6" Drawers & One 12" Locker - Right

(2)-6-inch---(1)-12-inch-locker-right

Two 6" Drawers & One 12" Locker - Left

(2)-6-inch---(1)-12-inch-locker-left

Single 12" Drawer

12-inch

Two 12" Drawers

One 12" Locker - Right

12-inch-locker-right

One 12" Locker - Left

12-inch-locker-left

Two 12" Lockers - Right

(2)-12-inch-locker-Rright

Two 12" Lockers - Left

(2)-12-inch-locker-left

One 18" Locker - Right

(1)-18-inch-locker-right

One 18" Locker - Left

Worksurfaces

high pressure laminate worksurface

  • Standard high pressure laminate is used on all standard work benches, work surfaces shelves and carts.
  • Impact resistant
  • 180 degree rolled Ergo front edge
  • 1.125″ thick industrial grade particle board under core
  • Sealed on bottom to prevent warping

esd laminate worksurface

  • High impact resistant laminate
  • Ergo 180 degree front rolled edge
  • 1.125″ thick industrial grade partial board
  • Dissipation level is greater than 10/6th, but less than 10/9th

stainless steel worksurface

  • 18ga #304 stainless steel
  • 3/16 front edge radius
  • Brush finish
  • #316 Stainless is option if anti-rust is needed
  • Standard substrate finish is load bearing and hat sections are mounted under the surface to take out any deflection
  • Glued over a 1.125″ thick particle board under core. This is an optional upcharge

phenolic-resin-worksurface

  • 3/4″ thick surface
  • Chemical and water resistant, see spec sheet for Chem resistance
  • Fore more detailed specifications see our Resources Section under Work Surface Data Sheets

epoxy-resin-worksurface

  • 1″ thick
  • 3/16″ front chamfered edge
  • Resistant against harsh chemicals
  • Heat resistant
  • Fore more detailed specifications see our Resources Section under Work Surface Data Sheets

Chemsurf-Laminate

  • Chemical resistant HPL laminate
  • High impact resistant
  • All edges are squared
  • 1.125 tick particle board under core
  • Surface is sealed on bottom to prevent warping

solid-surface-worksurface

  • Anti bacteria
  • 1/2″ thick
  • 1″ front edge build-up
  • Ergo rolled edge

foot-rest-tube

  • For the Concept 2000 line only
  •  Must specificy C2 or PB bench

foot-rest-pan

  • The footrest tube is 1” round heavy duty steel tubing and is finished in a bright zinc
  • Ergo pan is made in two different widths 24″ and 40″ wide.  24″ pan is for 36″ and 48′ wide benches
  • C2 footrest tube adjusts in/out and up/down.
  • The footrest pan is a formed steel pan lined with a non slip friction tape
  • The Pan tilts up/down for operator comfort.

Free-standing-Footrest

  • Independent adjustments for foot pan height and angle
  • Heavy-gauge steel base with non-skid rubber floor glides on base and non–ABS friction tape on foot pan
  • Acceptable for Clean room applications

CPU

cpu holder

Made of heavy gauge steel, and formed for strength, comes with a front lip so the CPU will not slide out while the work bench is being transported. CPu come in two different configurations, (1) fixed platform and can attached to any WSI C2 workstation or any four legged bench, simply attached to leg frame using heavy duty self tapping sheet metal screws. (2) Adjustable CPU holder, the platform can be adjusted from 6″ – 9″ wide

  • Fixed CPU holder 8″w x 18″d x 11″h
  • Adjustable CPU Holder 6″ – 9″ w x 18″d x 20″h

Casters

total locking caster

There are several caster option to choose from, all caster are 1.25″ x 4″

All casters carry a load rating of 1,000 lbs combined when using all four casters

  • Total locking caster, lock the roll and the swivel
  • Mount to bench frame as fixed hgt or adj 30″ – 36″
  • Locking the swivel and locking the roll
  • Used for equipment testing and adj, bench applications

standard-4-inch-caster

There are several caster option to choose from, all caster are 1.25″ x 4″ (5″ overall hgt with mounting hub)

All casters carry a load rating of 1,000 lbs combined when using all four casters

  • 4″ Standard Caster, swivel w/(2) locking
  • 5″ overall hgt including the mounting hub
  • Available as a fixed bench or cart or adjustable 30″ – 36″
  • Swivel with or without locks. You can also lock all 4 wheels

adjustable-glide-caster

There are several caster option to choose from, all caster are 1.25″ x 4″

All casters carry a load rating of 1,000 lbs combined when using all four casters

  • Adjustable and leveling caster, 2 x 2, will adjust to level out the bench, 800 load capacity

soft-dual-wheel-caster

This caster is used for all mobile cabinets, (2 locking)

  • Load rating per all four casters 600 lbs
  • Comes with flat plate attachment
  • Nut and bolt hardware attachment

Hydraulic Lifts

Adj-hand-crank

Ergonomically adjustable Hydraulic Benches  have a positive impact on employee productivity in the work place. The are available in 12", 14" and 16".

By making it more comfortable to work, ergonomic benches can reduce lost time, hours and worker’s compensation claims in multi shift operations.

Choose to sit down or stand up at your bench by simply using a manual, hand crank or an electric control.

True ergonomics is lifting the entire work surface and shelves, no need to adjust the shelves when lifting the work surface.

  • Ergonomically adjustable hydraulic lifting bench systems come with  a two 12″ cylinder system
  • Available with a manual hand crank or a motorized button lifting system.
  • Two cylinder will support up to 500 lbs of lifting
  • Four cylinder system will lift up to 1,000 lbs.
  • Lifting capacity includes the weight of the work surface, frame , shelves and any material being lifted.
  • An optional four cylinder system can be added to any existing bench by bolting to the legs of  the work bench
  • C2 double sided benches can have a lifting system  added to both work surfaces or just one work surface.
  • Starter adder benches can  also have the lifting system added to any bench in the row of benches
  • Motorized system come with a standard toggle control or can be upgraded to an programable control
TOGGLE SWITCH (STANDARD)

4-Cyl-Adj-bench-web

Ergonomically adjustable Hydraulic Benches  have a positive impact on employee productivity in the work place. By making it more comfortable to work, ergonomic benches can reduce lost time, hours and worker’s compensation claims in multi shift operations. Choose to sit down or stand up at your bench by simply using a manual, hand crank or an electric control.

True ergonomics is lifting the entire work surface and shelves, no need to adjust the shelves when lifting the work surface.

  • Ergonomically adjustable hydraulic lifting bench systems come with  a two 12″ cylinder system
  • Available with a manual hand crank or a motorized button lifting system.
  • Four cylinder system will lift up to 1,000 lbs. Lead times are longer for 4 cylinder 16" systems
  • Lifting capacity includes the weight of the work surface, frame , shelves and any material being lifted.
  • An optional four cylinder system can be added to any existing bench by bolting to the legs of  the work bench
  • Motorized system come with a standard toggle control or can be upgraded to an programmable control
PROGRAMMABLE SWITCH (UP-GRADE)

Motorized Electrc progrmable memory switchmable switch

Add On Accessories

Steel-peg-board-web

  • Steel peg board, 24″ high. Available sizes are 36″ – 72″
  • Color will match the bench color or be painted using any one of our standard colors
  • 4" to 6" non-perforated on all sides

Steel-Multi-bin-panel

  • Multi bin Ergo parts cup rail 6″ high, comes with two mounting brackets
  • Sizes range from 48″ – 72″

parts-cup-rail-single-box

  • Single Parts Cup Rail 1.5″ high, comes with 2″ mounting brackets for the C2 Series Bench
  • Sizes range from 48″ – 96″

tool trolley

  • Tool Trolly with hanger includes two mounting brackets
  • Heavy duty roller hanger also available as an upgrade
  • Available sizes are 48″ – 72″

Chairs

new-2000-series-chair

2000 Series Three Paddle Production Chair is a fully adjustable ergonomic chair. The seat and back tilts and adjusts independent of each other. Production Chair seat and backrest are manufactured with  molded contour foam and have been ANSI/BIFMA tested and certified .

This chair is warrantied for 7 years.

new-1058-esd-seat

1000 Series Chair (two paddle)is an adjustable ergonomic chair. The seat adjusts up and down, the backrests has an deluxe tension tilt adjustment. This chair is warranted for 7-years, see warranty statement.

700 Series Single Paddle ESD or Standard Polyurethane Seating is our basic  Industrial Chair.

The 700 Series Chairs are specifically designed for long term seating and lasting use in the toughest working environment. Furthermore, the polyurethane series chairs are designed with ergonomics as the prevailing feature, these chairs improve productivity and reduce body fatigue due to long term seating.

new-500-series-chair-esd-fabric

500 Series Chair Single Paddle is our most economical chair.

Medium density 2.5”thick foam for both the backrest and the seat.Production Chair has been ANSI/BIFMA tested and certified . This chair is warrantied for 7 years.

UL LISTED AND SEFA CERTIFIED PRODUCTS

Our Concept 2000 Modular Workstations and our Production Workbenches can be customized with our extensive line of accessories. All electrical components are UL Certified and meet any technical assembly or laboratory requirements.

Ul Certified
sefa-certified

All of our laboratory cabinets, stand alone cabinets and wall cabinets are SEFA Certified.

I’m Interested In Getting A Free Workstation Quote

Let us know what you needs are and we’ll respond to you right away.

Some Of Our Customers

We work with some of the best known names in the industry.