Production Workbenches

Our Production Workbenches offer exceptional versatility and can be tailored to suit individual requirements. They are highly customizable, accommodating various budgets, and can be easily expanded to accommodate a company’s evolving needs by incorporating accessories and additional modules.

Our Production Workbenches are extremely versatile and customizable. Not only do our products fit every budget size, they easily expand to meet a company’s growing needs through the addition of accessories and more modules.

   Modular Expansion

   UL-Listed

   ESD Models and Options production-workbench-double-sided

   Ergonomic Design

   Clean Room

Our “Basic” units are available in Single-Sided or Double-Sided workbench configurations. Customize any configuration to meet your specific needs and have them completed and shipped in a timely manner.

All of WSI’s workbench components are ergonomically designed to ensure maximum worker safety, improved efficiency and greater productivity.

Dimensions

Standard Lengths: 48, 60, 72“, 96”
Standard Depths: 30, 36
Work Surface Height: Adjustable 30″ – 36″ High

Maximum Load:
Single Sided – UL Listed: 750 lbs.
Double Sided – UL Listed: 1200 lbs.

WSI-Customer-Service

We offer 3 main shipping options:

  1. Prepaid Shipping – WSI will prepay the shipping and add it to the invoice.
  2. Freight Collect – The customer pays the shipping company when the product arrives. A $45 charge, per pallet, for packaging will be added.
  3. Will Call – Will call goods can be sent knock down on a pallet or fully assembled.  Fully assembled products will require blankets and straps for wrapping to prevent damage

When WSI ships a fully assembled product, we provide all the blankets and straps.

Warranty Information

All WSI products come with a limited life time warranty . All structural steel components are warrantied for life against structural failure and three years for workmanship. Laminate work surface is warrantied for three years against delaminating and workmanship.

All painted finishes are warrantied for three years against paint defects or flaking. Lights and any other electrical accessories are warrantied for one year. Chairs: All non-moving structural components, (seat and back rest pans, back bar, and the base) come with a life time warranty. Seat and back rest foam, ESD fabric, standard fabric one year, all other moving components, seven years. Warranty date starts at the time the product ships out of our facility.

Replacement or repair is the sole discretion of WSI. The warranty Is based upon an eight hour day, five day work week.

Complete the form below for a free no obligation Quote


We will respond to your request very soon



Paint-color-options
wsi-laminate-samples-revised

Drawers, Shelving & Accessories

Shelving

Lam-shelf-smAvailable depth sizes are 12″, 15″ & 18″.  Comes with two mounting brackets and a load beam. The load beam is only for the 60", 72" & 96" shelves.

  • Shelf material can be the same material used on the work surface, however, you need to specify when placing the order
  • Load bearing capacity 250 lbs evenly distributed
  • Heavier load capacity shelves are available
  • PB shelves are adjustable in 1" increments
  • Shelves come in ESD & Standard laminate
  • Clean Room underseal on all laminate shelving is available

Steel-shelving-smAvailable depth sizes are 12″, 15″, & 18″.  Comes with front lip and two brackets.

  • All PB shelves are adjustable in 1" increments
  • Both style shelves can be tilted forward 15%
  • All shelves come with load bearing shelf support,  300 lb load rated, evenly distributed
  • Extra heavy duty shelves are available

Wire-Shelf-sm12″ deep

  • Shelves are made of heavy gauge wire
  • Finished with a silver zinc epoxy powder coat
  • All wire shelves come with a 1″ front wire lip
  • 50 lb load rating evenly distributed
  • PB shelves can tilt 15 degrees forward
  • split-shefThe split shelf design provides additional shelving and/or other hang-on accessories where needed.
  • Mounts to the inside uprights of PB benches
  • Overhead Hutches, Electrical Channel, Shelves and other accessories can all mount to the frame
  • All WSI accessories can mount to a split shelf unit. Single sided split shelf frames mount on one side only. Double sided frames can have accessories mounted on both sides.

Cabinets

C2-FD-smAll steel cabinets are made of heavy duty 18 gauge steel

  • Doors are double lined on the inside & outside for quiet operation
  • Hinges are stainless steel industrial insertional 180 degree five knuckle hinges
  • All doors come with one lock
  • Dual roller magnetic catch to keep the doors closed
  • 100% epoxy baked on powder paint
  • Available widths: 18", 24", 30", 36″, 42"
  • Available heights: 24", 30", 36″, & 48″
  • Optional glass hinged door inserts available
  • Sliding glass doors also available
  • Cabinets come with a tubular frame for mounting to the uprights for a Production Bench and C2 bench. Tubular frame applies to benches that are grater than 48" wide (2) 30" for a 60" bench. (2) 36" cabinets for a 72" bench. (2) 48" cabinets for a 96" bench

C2-FD-smAll steel cabinets are made of heavy duty 18 gauge steel

  • Doors are double lined on the inside & outside for quiet operation
  • Hinges are stainless steel industrial insertional 180 degree five knuckle hinges
  • All doors come with one lock
  • Dual roller magnetic catch to keep the doors closed
  • All cabinets are SEFA compliant
  • 100% epoxy baked on powder paint
  • Available widths: 18", 24", 30", 36″, 42"
  • Available heights: 24", 30", 36″, & 48″
  • Optional glass hinged door inserts available
  • Sliding glass doors also available
  • Cabinets come with a tubular frame for mounting to the uprights for a Production Bench and C2 bench. Tubular frame applies to benches that are grater than 48" wide (2) 30" for a 60" bench. (2) 36" cabinets for a 72" bench. (2) 48" cabinets for a 48" bench

Electrical Systems

EL5 Electrical OptionAll WSI electrical options have been certified by UL and are inspected on a monthly basis for installation practices and component consistency

  • Work surface mounted fits between uprights
  • Size 24", 36" & 48" lengths
  • 8' power cord is standard. 10' or 15' power cords are optional
  • 8 outlets 15amp is standard. Optional 20 amp available
  • On off switch - Circuit breaker

4C-UPG Electrical option

  • EL-4 electrical can be mounted in the front or rear of the bench. It can also be mounted to the worksurface
  • Comes with 8 outlets and 15 amp power
  • 8' power cord

C@-Dec1 Electrical Option

  • EL-3 electrical can be mounted in the front or rear of the bench to the front or rear beam. It can also be mounted to the worksurface
  • Comes with  8 outlets and 15 amp power
  • 8' power cord

el-2 Electrical Option

  • EL-2 has six electrical outlets mounted in the front face of each riser box
  • Qty (1) electrical panel and the other riser box side is open
  • Cover panel (CP) is optional
  • upright mounted electrical channel15 or 20 amp power
  • Single or two-phase power
  • Mounts to production bench slotted uprights or Concept 2000 uprights
  • 16 gauge steel
  • Painted to match frame color
  • UL Listed

3 prong international plugcloseup-male-and-female-singapore-plug15-amp-female-singapore-receptacle

  • International plug options

Utility Options

Utility Duct

  • Utility duct way (UDW) with data, air or gas shielded partitions
  • The utility chase mounts above the work surface and in between the uprights and can be interconnected from upright to upright, and bench to bench
  • It can also be mounted to the worksurface
  • UDW can also be used above doorways to continue flow of cables & wires with no interruptions
  • UL Listed when ordered with the PB bench
  • Comes with the cover

Utility Duct MountUtility duct way mounts under the work surface to manage cables

  • Power PolesOur C2 Power Pole attaches to any new or existing C2 upright.
  • Wires drops from the ceiling.
  • Comes standard with a conduit landing bracket for utilities, (Power, Data, Air or Gas) to tie into and cover shroud
  • Shroud is used to cover the gap between the top of the power pole & ceiling
  • Power pole comes within 3” short of the ceiling, specify height of ceiling when ordering.

Air HoseFor interconnecting air from bench to bench.

  • Mounts in front beam
  • Hostler mount ADSH-PB comes with one female coupler, interconnecting hose, and pigtail hose for incoming source
  • Coupler can be mounted to the front beam
  • Coupler can be purchased separately

Lighting

Overhead Light

Overhead lighting fixture with light housing and prismatic lens

  • Available in 36", 48", 60", 72" & 96" widths
  • Standard overhead light is 48" and has one on/off switch, 8ft power cord and a circuit breaker
  • LED light bulb is the standard light fixture. According to new laws, fluorescent ballast type lights are no longer available
  • Wattage per LED light - 24" = 15W, 36" = 25W, 48" = 30W
  • Prismatic lens
  • LED power efficiency is 85% and 30K - 50K hour life span
  • All sizes of light fixtures come in double tube, single tube or as an under counter light fixture
  • Bulbs sold separately. 24", 36" or 48" bulbs.

Under Shelf Light

  • Under counter light are available in 36″ and 48″ sizes. LED lights are now the standard light fixture. Florescent bulbs are no longer available

Economy Overhead Light

Our Economy light fixture is a great option for businesses on a tight budget

  • Available in 36", 48", 72" & 96" widths
  • When purchasing our Economy lights, you must have a production workbench with slotted uprights already. Brackets for mounting light come with the purchase of the production Bbnch and slotted uprights
  • Comes with a lens wrap
  • Uses LED bulbs which are not included
  • The 96” Economy light for 96" benches consists of (2) 48 inch lights with (1) on/off swtich, L brackets, light mounting bar and 8ft. power cord

Swing Arm Options

Basic Swing Arm

  • Fully articulating swing are that moves side to side and up and down
  • Can be mounted to the worksurface and slotted uprights

Flat Screen Monitor Arm

  • Holds up to a 19" monitor
  • Swing Arm is 10" in lenght
  • Shown here with the extension arm attached

Flat Screen Monitor Arm Extension

  • Extension arm attached to the Flat Screen Monitor Arm
  • Adds an additional 8" in lenght
  • Two arms allow for 180 degrees of rotation
  • Loosen bolts to move up and down
  • Holds 19" monitor
  • Purchase a double arm and receive 10" arm, 8" arm, 3 knuckles, 1 mounting bracket and 1 hinged panel bracket for connecting arms together and mounting

Platform Swing Arm

  • Used to hold, laptop, tools, paper etc.
  • Steel surface
  • 12" x 12" with lower lip at bottom

Platform Swing Arm

  • Uses the Flat Screen Monitor Arm and then WSI adds a keyboard option and arm to mount the monitor.

Drawers

Our drawers are ergonomically designed and constructed to offer you a wide array of options. All of our drawers come with:

 18" Full Extension

 100-lb Rated Heavy Duty Roller Bearing Slide

 Drawer Dimensions - 15" wide x 18" deep

 Please specify when ordering if locks are needed and if they need to be keyed the same or differently

We also offer several different handle options:

 Plastic cup handle

 Aluminum handle cup pull handle

 Full finger steel pull that runs the length of the drawer

 Lab grade aluminum handle pull

 Chrome wire pull

Drawer Configurations

Single 3" Drawer

(1)-3-inch

Four 3" Drawers & Two 6" Drawers

(4)-3-inch---(2)-6-inch

Two 3" Drawers & Three 6" Drawers

Eight 3" Drawers

8-3inch-drawers

Four 3" Drawers & One 12" Drawer

(4)-3-inch---(1)-12-inch

Four 3" Drawers & One 12" Locker - Right

(4)-3-inch---(1)-12-inch-locker-right

Four 3" Drawers & One 12" Locker - Left

(4)-3-inch---(1)-12-inch-locker-left

Two 3" Drawers & One 18" Locker - Right

(2)-3-inch---(1)-18-locker-right

Two 3" Drawers & One 18" Locker - Left

(2)-3-inch---(1)-18-locker-left

Single 6" Drawer

(1)-6-inch

Two 6" Drawers

(2)-6-inch

Four 6" Drawers

(4)-6-inch

One 6" Drawer & One 12" Drawer

1-6-1-12-horz

Two 6" Drawers & One 12" Drawer

(2)-6-inch---(1)-12-inch

Two 6" Drawers & One 12" Locker - Right

(2)-6-inch---(1)-12-inch-locker-right

Two 6" Drawers & One 12" Locker - Left

(2)-6-inch---(1)-12-inch-locker-left

Single 12" Drawer

12-inch

Two 12" Drawers

One 12" Locker - Right

12-inch-locker-right

One 12" Locker - Left

12-inch-locker-left

Two 12" Lockers - Right

(2)-12-inch-locker-Rright

Two 12" Lockers - Left

(2)-12-inch-locker-left

One 18" Locker - Right

(1)-18-inch-locker-right

One 18" Locker - Left

Worksurfaces

high pressure laminate worksurface

  • Standard high pressure laminate is used on all standard work benches, work surfaces shelves and carts.
  • Impact resistant
  • 180 degree rolled Ergo front edge
  • 1.125″ thick industrial grade particle board under core
  • Sealed on bottom to prevent warping

HPL Laminate Data Sheet

esd laminate worksurface

  • High impact resistant laminate
  • Ergo 180 degree front rolled edge
  • 1.125″ thick industrial grade partial board
  • Dissipation level is greater than 10/6th, but less than 10/9th
  • Banana Jacks are optional

ESD Laminate Data Sheet

stainless steel worksurface

  • 18ga #304 stainless steel
  • 3/16 front edge radius
  • Brush finish
  • #316 Stainless is option if anti-rust is needed
  • Standard substrate finish is load bearing and hat sections are mounted under the surface to take out any deflection
  • Glued over a 1.125″ thick particle board under core. This is an optional up charge

304 Stainless Steel Data Sheet

phenolic-resin-worksurface

  • 3/4″ thick surface
  • 3/16 bevel edge on all sides
  • Chemical and water resistant, see spec sheet for Chemical Resistance

Phenolic Resin Data Sheet - Trespa Athlon

Phenolic Resin Data Sheet - Trespa Top Lab

epoxy-resin-worksurface

  • 1″ thick
  • Resistant against harsh chemicals
  • Heat resistant

Epoxy Resin Data Sheet

Chemsurf-Laminate

  • Chemical resistant HPL laminate
  • High impact resistant
  • All edges are squared
  • 1.125 tick particle board under core
  • Surface is sealed on bottom to prevent warping

Chemical Laminate Data Sheet

solid-surface-worksurface

  • Anti bacteria
  • 1/2″ thick
  • 1″ front edge build-up
  • Ergo rolled edge

foot-rest-tube

  • The Footrest Tube can be used on both the C2 or PB bench. You must specify which type of bench the tube is for as they mount differently.

foot-rest-pan

  • The footrest tube is 1” round heavy duty steel tubing and is finished in a bright zinc
  • Ergo pan is made in two different widths 24″ and 40″ wide.  24″ pan is for 36″ and 48′ wide benches
  • PB footrest tube adjusts in/out
  • The footrest pan is a formed steel pan lined with a non slip friction tape
  • The Pan tilts up/down for operator comfort.

Free-standing-Footrest

  • Independent adjustments for foot pan height and angle
  • Heavy-gauge steel base with non-skid rubber floor glides on base and non–ABS friction tape on foot pan
  • Acceptable for Clean room applications

CPU

cpu holder

Made of heavy gauge steel, and formed for strength, comes with a front lip so the CPU will not slide out while the work bench is being transported. CPU comes in two different configurations, (1) fixed platform and can attached to any WSI PB workbench or any four legged bench, simply attached to leg frame using heavy duty self tapping sheet metal screws. (2) Adjustable CPU holder, the platform can be adjusted from 6″ – 9″ wide

  • Fixed CPU holder 8″w x 18″d x 11″h
  • Adjustable CPU Holder 6″ – 9″ w x 18″d x 20″h

Casters

total locking caster

There are several caster option to choose from, all caster are 1.25″ x 4″

All casters carry a load rating of 1,000 lbs combined when using all four casters

  • Total locking caster, lock the roll and the swivel
  • Mount to bench frame as fixed hgt or adj 30″ – 36″
  • Locking the swivel and locking the roll
  • Used for equipment testing and adj, bench applications

standard-4-inch-caster

There are several caster option to choose from, all caster are 1.25″ x 4″ (5″ overall hgt with mounting hub)

All casters carry a load rating of 1,000 lbs combined when using all four casters

  • 4″ Standard Caster, swivel w/(2) locking
  • 5″ overall hgt including the mounting hub
  • Available as a fixed bench, specifiy height, or cart or adjustable 30″ – 36″
  • Swivel with or without locks. You can also lock all 4 wheels

adjustable-glide-caster

There are several caster option to choose from, all caster are 1.25″ x 4″

All casters carry a load rating of 1,000 lbs combined when using all four casters

  • Adjustable and leveling caster, 2 x 2, will adjust to level out the bench
  • 1,ooo load capacity

soft-dual-wheel-caster

This caster is used for all mobile cabinets, (2 locking)

  • Load rating per all four casters 600 lbs
  • Comes with flat plate attachment
  • Nut and bolt hardware attachment

Hydraulic Lifts

Adj-hand-crank

Ergonomically adjustable Hydraulic Benches  have a positive impact on employee productivity in the work place. They are available in 12", 14" and 16".

By making it more comfortable to work, ergonomic benches can reduce lost time, hours and worker’s compensation claims in multi shift operations.

Choose to sit down or stand up at your bench by simply using a manual, hand crank or an electric control.

True ergonomics is lifting the entire work surface and shelves, no need to adjust the shelves when lifting the work surface.

  • Ergonomically adjustable hydraulic lifting bench systems come with  a two 12″ cylinder system
  • Available with a manual hand crank or a motorized button lifting system.
  • Two cylinder will support up to 500 lbs of lifting
  • Four cylinder system will lift up to 1,000 lbs.
  • Lifting capacity includes the weight of the work surface, frame , shelves and any material being lifted.
  • An optional four cylinder system can be added to any existing bench by bolting to the legs of  the work bench
  • PB double sided benches can have a lifting system  added to both work surfaces or just one work surface.
  • Starter adder benches can  also have the lifting system added to any bench in the row of benches
  • Motorized system come with a standard toggle control or can be upgraded to an programmable control
TOGGLE SWITCH (STANDARD)

4-Cyl-Adj-bench-web

Ergonomically adjustable Hydraulic Benches  have a positive impact on employee productivity in the work place. By making it more comfortable to work, ergonomic benches can reduce lost time, hours and worker’s compensation claims in multi shift operations. Choose to sit down or stand up at your bench by simply using a manual, hand crank or an electric control.

True ergonomics is lifting the entire work surface and shelves, no need to adjust the shelves when lifting the work surface.

 

  • Ergonomically adjustable hydraulic lifting bench systems come with  a two 12″ cylinder system
  • Available in 12", 14" and 16"
  • Available with a manual hand crank or a motorized button lifting system.
  • Four cylinder system will lift up to 1,000 lbs. Lead times are longer for 4 cylinder 16" systems
  • Lifting capacity includes the weight of the work surface, frame , shelves and any material being lifted.
  • An optional four cylinder system can be added to any existing bench by bolting to the legs of  the work bench
  • Motorized system come with a standard toggle control or can be upgraded to an programmable control
PROGRAMMABLE SWITCH (UP-GRADE)

Motorized Electrc progrmable memory switchmable switch

Add On Accessories

Steel-peg-board-web

  • Steel peg board, 24″ high. Available sizes are 36″ – 72″
  • Color will match the bench color or be painted using any one of our standard colors
  • 4" to 6" non-perforated on all sides

Steel-Multi-bin-panel

  • Multi bin Ergo parts cup rail 6″ high, comes with two mounting brackets
  • Bins available in 6", 12" and 18"
  • Sizes range from 48″ – 72″

parts-cup-rail-single-box

  • Single Parts Cup Rail 1.5″ high, comes with 2″ mounting brackets for the PB Series Bench
  • Sizes range from 48″ – 96″

tool trolley

  • Tool Trolly with hanger includes two mounting brackets
  • Heavy duty roller hanger also available as an upgrade
  • Available sizes are 48″ – 72″
  • Shown with optional tool balancer

multi bin rail panel

  • 18 gauge cold rolled steel or stainless steel
  • 24" - 96" wide x 6" and 12" in height
  • Powder coated to match frame color
  • Rail can be mounted to Production Bench slotted uprights or C2 uprights

Chairs

new-2000-series-chair

2000 Series Three Paddle Production Chair is a fully adjustable ergonomic chair. The seat and back tilts and adjusts independent of each other. Production Chair seat and backrest are manufactured with  molded contour foam and have been ANSI/BIFMA tested and certified .

This chair is warrantied for 7 years.

new-1058-esd-seat

1000 Series Chair (two paddle)is an adjustable ergonomic chair. The seat adjusts up and down, the backrests has an deluxe tension tilt adjustment. This chair is warranted for 7-years, see warranty statement.

700 Series Single Paddle ESD or Standard Polyurethane Seating is our basic  Industrial Chair.

The 700 Series Chairs are specifically designed for long term seating and lasting use in the toughest working environment. Furthermore, the polyurethane series chairs are designed with ergonomics as the prevailing feature, these chairs improve productivity and reduce body fatigue due to long term seating.

new-500-series-chair-esd-fabric

500 Series Chair Single Paddle is our most economical chair.

Medium density 2.5”thick foam for both the backrest and the seat.Production Chair has been ANSI/BIFMA tested and certified . This chair is warrantied for 7 years.

UL LISTED PRODUCTS

Our Concept 2000 Modular Workstations and our Production Workbenches can be customized with our extensive line of accessories. All electrical components are UL Certified and meet any technical assembly or laboratory requirements.

Ul Certified

I’m Interested In Getting A Free Workbench Quote

Let us know what you needs are and we’ll respond to you right away.

Some Of Our Customers

We work with some of the best known names in the industry.